Publications

Department of Hydraulic Engineering and Water Resources Management

A list of all LWW publications is published here.

true" ? copyright : '' }

Phd theses of the Department of Hydraulic Engineering and Water Resources Management

  1. 2023

    1. Sadid, N. (2023). Bedload transport estimation in mountainous intermittent rivers and streams (Dissertation No. 298, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart). https://doi.org/10.18419/opus-13448
  2. 2022

    1. Koca, K. (2022). Advanced experimental methods for investigating flow-biofilm-sediment interactions (Dissertation No. 287, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart). https://doi.org/10.18419/opus-12309
    2. Mayar, M. A. (2022). High-resolution spatio-temporal measurements of the colmation phenomenon under laboratory conditions (Dissertation No. 289, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung). https://doi.org/10.18419/opus-12114
    3. Haun, S. (2022). Advanced methods for a sustainable sediment management of reservoirs (Habilitationsschrift No. 295, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart). https://doi.org/10.18419/opus-12532
  3. 2021

    1. Beckers, F. (2021). Investigations on functional relationships between cohesive sediment erosion and sediment characteristics (E. des Instituts für Wasser-und Umweltsystemmodellierung der Universität Stuttgart, ed.) [Universität Stuttgart]. https://doi.org/dx.doi.org/10.18419/opus-11644
  4. 2020

    1. Seitz, L. (2020). Development of new methods to apply a multiparameter approach - a first step towards the determination of colmation (Vol. 276) [Dissertation, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. https://doi.org/10.18419/OPUS-11249
  5. 2019

    1. Thom, M. (2019). Towards a better understanding of the biostabilization mechanisms of sediment beds (Dissertation No. 270, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung). https://doi.org/10.18419/opus-10808
    2. Stolz, D. (2019). Die Nullspannungstemperatur in Gewichtsstaumauern unter Berücksichtigung der Festigkeitsentwicklung des Betons (Dissertation No. 271, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung). https://doi.org/10.18419/opus-10945
    3. Buchta, R. (2019). Entwicklung eines Ziel- und Bewertungssystems zur Schaffung nachhaltiger naturnaher Strukturen in großen sandgeprägten Flüssen des norddeutschen Tieflandes [Phdthesis, Stuttgart: Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. http://dx.doi.org/10.18419/opus-10520
  6. 2018

    1. Fenrich, E. K. (2018). Entwicklung eines ökologisch-ökonomischen Vernetzungsmodells für Wasserkraftanlagen und Mehrzweckspeicher [Phdthesis, Stuttgart : Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. http://dx.doi.org/10.18419/opus-10112
    2. Schröder, H. C. (2018). Large-scale high head pico hydropower potential assessment [Phdthesis, Stuttgart : Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. http://dx.doi.org/10.18419/opus-10236
    3. Schmidt, H. (2018). Microbial stabilization of lotic fine sediments [Phdthesis, Stuttgart : Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. http://dx.doi.org/10.18419/opus-10015
    4. Harten, M. v. (2018). Analyse des Zuppinger-Wasserrades : hydraulische Optimierungen unter Berücksichtigung ökologischer Aspekte [Phdthesis, Stuttgart : Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung der Universität Stuttgart]. http://dx.doi.org/10.18419/opus-10322
    5. Gebler, T. (2018). Statistische Auswertung von simulierten Talsperrenüberwachungsdaten zur Identifikation von Schadensprozessen an Gewichtsstaumauern [Phdthesis, Stuttgart : Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung]. http://dx.doi.org/10.18419/opus-10196
  7. 2017

    1. Schwindt, S. (2017). Hydro-morphological processes through permeable sediment traps [Thesis No. 7655, Laboratory of Hydraulic Constructions (LCH), Ecole Polytechnique fédérale de Lausanne (EPFL)]. https://doi.org/10.5075/epfl-thesis-7655
  8. 2015

    1. Zhang, J. (2015). Investigations on urban river regulation and ecological rehabilitation measures: case of Shenzhen River in China (Vol. 234) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/opus/volltexte/2015/9787/
    2. Kramer, M. (2015). Luftbedarf von Freistrahlturbinen im Gegendruckbetrieb (Vol. 243) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/handle/11682/668
  9. 2014

    1. Siebel, R. (2014). Experimentelle Untersuchungen zur hydrodynamischen Belastung und Standsicherheit von Deckwerken an überströmbaren Erddämmen (Vol. 235) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/opus/volltexte/2014/9599/
  10. 2012

    1. Noack, M. (2012). Modelling approach for interstitial sediment dynamics and reproduction of gravel-spawning fish (Vol. 214) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/opus/volltexte/2012/7584/
    2. Tolossa, H. (2012). Sediment transport computation using a data-driven adaptive neuro-fuzzy modelling approach (Vol. 211) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/opus/volltexte/2012/7523/
    3. Tuhtan, J. (2012). A modeling approach for alpine rivers impacted by hydropeaking including the second law inequality (Vol. 210) [Promotionsschrift, Universität Stuttgart, Institut für Wasser- Umweltsystemmodellierung]. https://elib.uni-stuttgart.de/opus/volltexte/2012/7659/
  11. 2011

    1. Franke, J. (2011). Einfluss der Überwachung auf die Versagenswahrscheinlichkeit von Staustufen (Vol. 202) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2011/6188/
    2. Oinam, B. (2011). Integrated fuzzy-GIS approach for assessing regional soil erosion risks (Vol. 203) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2011/6326/
  12. 2010

    1. Itefa Geleta, H. (2010). Sedimentertragsmodells für Gebiete mit geringer Datengrundlage (Vol. 201) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2011/6152/
  13. 2009

    1. Ehsan, S. (2009). Evaluation of life safety risks related to severe flooding (Vol. 180) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2009/4006/
    2. Zöllner, F. (2009). Implementierung und Anwendung netzfreier Methoden im Konstruktiven Wasserbau und in der Hydromechanik (Vol. 185) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2009/4547/
    3. Prohaska, S. (2009). Development and Application of a 1D Multi-Strip Fine Sediment Transport Model for Regulated Rivers (Vol. 181) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2009/4127/
  14. 2008

    1. Kopecki, I. (2008). Calculational Approach to FST-Hemispheres for Multiparametrical Benthos Habitat Modelling (Vol. 169) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/frontdoor.php?source_opus=3867&la=de
  15. 2007

    1. Pozos Estrada, O. (2007). Investigation on the Effects of Entrained Air in Pipelines (Vol. 158) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2007/2942/
    2. Terheiden, K. (2007). Feuchte- und Salztransport: Charakterisierung der Interaktion zwischen Porenfluid und porösem Bauwerkstoff [Promotionsschrift]. Cuvillier Verlag Göttingen.
  16. 2005

    1. Qin, M. (2005). Wirklichkeitsnahe und recheneffiziente Ermittlung von Temperatur und Spannungen bei großen RCC-Staumauern (Vol. 138) [Promotionsschrift, Universität Stuttgart, Institut für Wasserbau]. https://elib.uni-stuttgart.de/opus/volltexte/2005/2271
  17. 2003

    1. Marx, W. (2003). Wasserkraft, Bewässerung, Umwelt - Planungs- und Bewertungsschwerpunkte der Wasserbewirtschaftung (Vol. 116) [Habilitationsschrift]. Universität Stuttgart, Institut für Wasserbau.
  18. 2002

    1. Heimerl, S. (2002). Systematische Beurteilung von Wasserkraftprojekten (Vol. 112) [Promotionsschrift]. Universität Stuttgart, Institut für Wasserbau.
    2. Iqbal, A. (2002). On the Management and Salinity Control of Drip Irrigation (Vol. 113) [Promotionsschrift]. Universität Stuttgart, Institut für Wasserbau.
  19. 2001

    1. Schneider, M. (2001). Habitat und Abflussmodellierung für Fließgewässer mit unscharfen Berechnungsansätzen (Vol. 108) [Promotionsschrift]. Universität Stuttgart, Institut für Wasserbau.
  20. 1994

    1. Zhang, W. (1994). Optimaler Echtzeit-Betrieb eines Speichers mit aktueller Abflußregenerierung (Vol. 83) [Promotionsschrift]. Universität Stuttgart, Institut für Wasserbau.
  21. 1987

    1. Marx, W. (1987). Berechnung von Temperatur und Spannung in Massenbeton infolge Hydratation (Vol. 64) [Promotionsschrift]. Universität Stuttgart, Institut für Wasserbau.

Supervised student assignments of the Department of Hydraulic Engineering and Water Resources Management

  1. 2023

    1. Investigation of the influence of heterogeneities on evaporation-driven density instabilities for two-phase flow. (2023). (Bachelorarbeit).
    2. Untersuchung naturnaher Flockungshilfsmittel als Alternative zu Polyacrylamid bei der Trinkwasseraufbereitung unter Berücksichtigung des Wiederverkeimungspotentials. (2023). (Masterarbeit).
  2. 2022

    1. Thermodynamic Analysis of Carbon Dioxide Mass Transport in a Stagnant Water Column. (2022). (Bachelorarbeit).
    2. Numerical Modeling of Biocement Production. (2022). (Masterarbeit).
    3. Coupling between a detailed model and a large-scale model for exchanging density-dependent salt fluxes. (2022). (Masterarbeit).
    4. Analysis of the Stefan flow problem and comparison to an advection-diffusion formulation. (2022). (Masterarbeit).
    5. Coupled Turbulent Free- and Porous Media Flows: Investigations of Interfacial Roughness. (2022). (mastersthesis).
    6. Combining a monolithic implementation of a locally-refined finite-volume staggered-grid method for the incompressible Navier-Stokes equations with an implementation of a SIMPLE-type solution algorithm. (2022). (Bachelorarbeit und Propädeutikum).
    7. Modeling of mechanical response to microbially induced calcite precipitation in porous media. (2022). (Masterarbeit).
    8. Untersuchung einer modifizierten Allen-Cahn-Gleichung ohne krümmungsbedingte Bewegung. (2022). (Bachelorarbeit).
    9. Biofilm-Visualisierung in mikrofluidischen Zellen. (2022). (Bachelorarbeit).
    10. Accurate Flow Boundary Conditions for the Lattice Boltzmann Method. (2022). (Masterarbeit).
    11. Modeling the use of microbially induced calcite precipitation for road construction. (2022). (Masterarbeit).
    12. Numerische Simulation des wärmegekoppelten Stofftransports durch die Speicherhülle eines Erdbeckenspeichers. (2022). (Masterarbeit).
    13. Coupled flow, transport, and geochemical processes in karstic fractures. (2022). (Masterarbeit).
    14. Coupled Free-Flow and Porous Media Flow Systems: Analysis of Turbulent Free-Flow Condtions and Pore-Network Models. (2022). (Forschungsmodul2).
  3. 2021

    1. Density-driven dissolution of CO2 in karst water - longterm monitoring and modelling in a water column. (2021). (Masterarbeit).
    2. SIMPLE-type methods for iteratively solving the Navier-Stokes equations. (2021). (Forschungsmodul 1). Universität Stuttgart.
    3. Transport Properties from Entropy Scaling using PC-SAFT Equation of State for the Modelling of Subsurface Hydrogen Storage. (2021). (Masterarbeit). Universität Stuttgart.
    4. Modeling calcite dissolution due to density-induced fingering of CO2-enriched water. (2021). (Master’s Thesis).
    5. Herleitung reduzierter Modelle einer Zweiphasenströmung zwischen parallelen Platten mit Slip-Bedingungen. (2021). (Projektarbeit).
    6. Modelling Turbulence in Coupled Environments: The K-Shear Stress Transport Model. (2021). (Master’s Thesis).
    7. Averaged Analysis of Pore Scale Dynamics via Closure Problems. (2021). (Forschungsmodul 2).
    8. Linear stability analysis for an evaporation problem of a porous slab. (2021). (Bachelorarbeit).
    9. Flow in diffusive transition zones. (2021). (Projektarbeit).
    10. Vergleich des Lösens der Navier-Stokes Gleichungen auf lokal verfeinerten versetzten Gittern in den Softwarepakete DuMux und IBAMR. (2021). (Projektarbeit).
    11. Modellierung von Deponien mit schwach radioaktivem Material. (2021). (Bachelorarbeit).
    12. Die Finite-Volumen-Methode am Beispiel der Konvektions-Diffusions-Gleichung. (2021). (Seminararbeit).
    13. A 0-dimensional conceptual model to facilitate coupling of groundwater and surface-water numerical models - and its application to a bog-wetland study area. (2021). (Masterarbeit).
    14. Discretizing free flow coupled to porous-medium flow by a locally-refined finite-volume staggered-grid method using an interface with refined pressures and coarse velocities. (2021). (Masterarbeit).
    15. Implementing and testing a standard black oil model in Dumux. (2021). (Masterarbeit).
    16. Experimental Investigation on the Impact of Induced Calcite Precipitation on Two-Phase Flow. (2021). (Bachalorarbeit).
    17. Experimentelle Untersuchung von induzerter Calcitausfällung. (2021). (Master’s Thesis).
    18. Numerical study on the modelling of macropores. (2021). (Master Thesis).
    19. Modeling of temperature-dependent mineral precipitation and dissolution in porous media. (2021). (Forschungsmodul).
    20. Experimentelle Untersuchung von mikrobiologisch induzierter Kalkausfällung in mikrofluidischen Zellen. (2021). (Bachalorarbeit).
    21. Investigation of linear solvers and preconditioners for sparse systems resulting from free-flow applications. (2021). (Masterarbeit).
  4. 2020

    1. Grundlagenuntersuchung zum saugseitigen Filter im DNOX-Fördermodul. (2020). (Masterarbeit).
    2. Untersuchung von Rissstrukturen bei der thermochemischen Wärmespeicherung mit CaO/Ca(OH)2. (2020). (Bachelorarbeit).
    3. Numerical investigation of fracture dilation processes in radioactive waste storage sites. (2020). (Masterarbeit). Universität Stuttgart.
    4. Entwicklung eines Stoffmodells für Wasserstoff unter überkritischen Bedingungen zur Analyse von Wasserstoffspeicherung im Untergrund. (2020). (Bachalorarbeit).
    5. Combination of a locally-refined quadtree finite-volume staggered grid scheme for the Navier-Stokes equation with turbulence models. (2020). (Forschungsmodul 2).
    6. Effective heat transfer models in thin porous media. (2020). (Bachelorarbeit).
    7. Untersuchung des lokalen thermischen Nicht-Gleichgewichts bei der thermochemischen Wärmespeicherung. (2020). (Projektarbeit). Universität Stuttgart.
    8. Mixed-dimension coupling methods with distributed sources for two phase flow problems in porous media. (2020). (Masterarbeit).
    9. Extension of a locally-refined quadtree finite-volume staggered-grid scheme to a drop-on-wall geometry. (2020). (Forschungsmodul 1).
    10. Kalibrierung eines realistischen Grundwassermodells mit FEPEST. (2020). (Masterarbeit).
  5. 2019

    1. A fully implicit formulation for Navier-Stokes/Darcy coupling. (2019). (Masterthesis). Retrieved from https://www.politesi.polimi.it/bitstream/10589/146077/1/2019_04_Vescovini.pdf
    2. Vergleich von Mehrkomponentendiffusionsansätzen im Kontext der Anwendung auf Brennstoffzellen. (2019). (bachelor thesis).
    3. Theorie und Erfahrung mit dem Gmsh Generator. (2019). (Seminararbeit).
    4. Instability analysis for salt precipitation processes in unsaturated porous media. (2019). (Bachelorarbeit).
    5. Numerische Simulation von Konvektion durch in Wasser gelöstes CO2. (2019). (Bachelorarbeit).
    6. Modelling of Isotope Transport and Evaporation Rates at the Porous Medium Free-Flow Interface. (2019). (Masterarbeit).
    7. Modelling and Simulation of the Thermal Utilization of Shallow Groundwater. (2019). (Masterarbeit).
    8. Examination of Mass Transfer Effects in Redox Flow Batteries by means of Analytical Modelling. (2019). (Masterarbeit).
    9. Numerische Ermittlung der Ergiebigkeit von Brunnen unter Berücksichtigung der Forchheimer-Gleichung und Darstellung der Ergebnisse in dimensionsloser Form / Numerical simulation of well yield using the forchheimer equation and presentation of the results by dimensionless numbers. (2019). (Masterarbeit).
    10. Quantifying similarities between computational expensive reactive transport models. (2019). (Bachelorarbeit).
    11. Pore and pore-network scale modeling on realistic geometries extracted from CT images. (2019). (Masterarbeit).
    12. Sensitivitätsanalyse eines reaktiven Transportmodells. (2019). (Projektarbeit).
    13. A dual pore-network model for fluid and energy transport in soils considering thermal non-equilibrium. (2019). (Masterarbeit).
    14. Decoupled solution of flow, transport and reactions for microbially enhanced coal bed methane scenarios. (2019). (Masterarbeit).
    15. Sensitivitätsanalyse für ein Modell zur mikrobiell erhöhten Methanproduktion in Kohleflözen. (2019). (Bacherlorarbeit).
    16. Implementierung eines numerischen Modells für den Transport von Tracerkomponenten in Zweiphasenströmungen. (2019). (Studienarbeit).
    17. Development of interface criteria for model reduction strategies for the simulation of hydrogen storage. (2019). (Masterarbeit). Universität Stuttgart.
    18. Non-isothermal effects in Compressed Air Energy Storage systems. (2019). (Masterarbeit).
    19. Experimental and numerical investigation of tracer transport in porous media on the pore scale. (2019). (Masterarbeit).
  6. 2018

    1. Investigation of the Streamline-Upwind Petrov-Galerkin method for the Navier-Stokes equations. (2018). (Bachelorarbeit). 0.
    2. Kopplung zwischen freier Strömung und Strömung im porösen Medium: Modellierung des Transportes von Metallen und Kolloiden in der hyporheischen Zone. (2018). (Bachelorarbeit).
    3. Modelling of salt precipitation and comparison with experimental results. (2018). (Masterthesis).
    4. Implementation of a finite element discretization for Stokes problems in DuMux. (2018). (Propaedeuticum).
    5. Machbarkeit und Effizienz von Pumpspeicherung im Untergrund. (2018). (Studienarbeit).
    6. Berechnung der Öffnungsweite bei Zugversagen mit Hilfe eines analytischen Ansatzes. (2018). (Bachelorarbeit).
    7. Thermodynamische Analyse einer CAES-Anlage - mit Fokus auf analytischer Approximation. (2018). (Bachelorarbeit).
    8. Upscaling von kapillaren Netzwerkstrukturen. (2018). (Masterthesis).
    9. Modelling hydrodynamic dispersion under two-phase flow conditions. (2018). (Masterarbeit).
    10. Modeling fractures in a CaO/Ca(OH)2 thermo-chemical heat storage reactor. (2018). (Masterthesis).
    11. Pumpversuche zur Bestimmung hydrogeologischer Parameter. (2018). (Bachelorarbeit).
    12. Experimentelle Visualisierung von Konvektion durch in Wasser gelöstes CO2. (2018). Universität Stuttgart.
    13. Parameterization of element balance formulation in reactive compositional flow and transport. (2018). (Masterarbeit). TU Delft.
    14. Investigation of different coupling schemes for hybrid-dimensional models. (2018). (Masterthesis).
    15. Numerical simulations of underground carbon dioxide storage with hydrogen impurities. (2018). (Masterthesis).
    16. Analyse der Möglichkeiten von Energiespeicherung durch Unterwasserdruckluftspeicherkraftwerke. (2018). (Bachelorarbeit).
    17. Experimental and numerical investigation of enzymatically induced calcite precipitation in porous media. (2018). (Masterthesis).
    18. Investigating turbulence in an indirect thermo-chemical heat storage reactor. (2018). (Bachelorarbeit).
    19. Modeling heat transfer between porous medium and free flow. (2018). (Projektarbeit).
    20. Analyse der Möglichkeiten von Energiespeicherung durch Windkraftanlagenpumpspeicherkraftwerke. (2018). (Bachelorarbeit).
    21. Dichtegetriebene Strömung durch Einlösen von CO2 in Wasser. (2018). (Bachelorarbeit).
    22. Parametersensitivitätsstudie für ein biogeochemisches Goldkreislaufmodell. (2018). (Bachelorarbeit).
    23. Implementation of Adsorption Isotherms in the numerical simulator DuMuX. (2018). (Studienarbeit).
    24. Modellierung und Simulation von Vaskulogenese und Angiogenese. (2018). (Studienarbeit).
  7. 2017

    1. Analyse der Möglichkeiten von Energiespeicherung durch Hochhauspumpspeicherkraftwerke. (2017). (Bachelorarbeit).
    2. Ansätze zur Kopplung von Grundwasser- und Fließgewässermodellen - Vergleich von Softwarelösungen. (2017). (Masterthesis).
    3. Abschätzung von Möglichkeiten der Wärmegewinnung aus Grundwasser und Entwicklung eines Programms für eine Parameterstudie. (2017). (Bachelorarbeit).
    4. Comparison of the use of hydrogen and methane for underground energy storage. (2017). (Bachelorarbeit).
    5. Bayesian model selection for hydro-morphodynamic models. (2017). (Masterthesis).
    6. Development of a Numerical Model for Microbial Precipitation of Metallic Gold. (2017). (Masterthesis).
    7. Lumped parameter models for the human cardiovascular system. (2017). (Masterthesis).
    8. Parameterstudie zur Charakterisierung verschiedener Bodenarten für Poren-Netzwerk-Modelle. (2017). (Bachelorarbeit).
    9. Auslegung einer Gebäudeheizung mit einem thermochemischen Wärmespeicher. (2017). (Bachelorarbeit).
    10. Simulation of Blood Flow through a Bifurcation at capillary level by 3D and 1D models. (2017). (Bachelorarbeit).
    11. Erstellung eines Programms zur Auslegung von Rohrnetzwerken in der Wasserversorgung. (2017). (Bachelorarbeit). Universität Stuttgart.
    12. Convergence analysis of two-phase flow systems in porous media: Comparison of implicit hybrid upwinding and phase potential upwinding. (2017). (Bachelorarbeit).
    13. Numerical investigation of turbulent flow around obstacles and evaporating porous media. (2017). (Masterthesis).
    14. Investigation of parametrization of dual-continuum models through multi-scale finite volume methods. (2017). (Masterthesis).
    15. Investigation of the SUPG method: Concept and 1-d implementation. (2017). (Projektarbeit).
    16. Modellierung des diffusiven Methantransports im Zusammenhang mit Hydraulic Fracturing. (2017). (Bachelorarbeit).
    17. Modelling of intra- and extracellular flow and transport processes. (2017). (Masterthesis).
    18. Modeling microbially enhanced coal-bed methane production. (2017). (Masterthesis).
    19. Entwicklung eines Programms zur Auslegung eines hydraulischen Widders. (2017). (Bachelorarbeit).
    20. Modellierung und experimentelle Untersuchung des Stoffsystems SrBr2/H2O zur thermochemischen Energiespeicherung. (2017). (Masterthesis).
  8. 2016

    1. Numerical Simulations to Reproduce Experiments on Capillary Liquid Uptake in Core Samples. (2016). (Masterthesis).
    2. Algorithmus zur Zeitschrittweitenanpassung für das linear elastische Modell. (2016). (Bachelorarbeit).
    3. Development of 1D and 3D DuMuX models to simulate transport of nano zero-valent iron particles in porous media. (2016). (Masterthesis).
    4. Development of a numerical model for thermal-ureolysis-induced calcite precipitation. (2016). (Masterthesis).
    5. Effizienz von Druckluftspeicherung in porösen geologischen Formationen. (2016). (Bachelorarbeit).
    6. Experimentelle Untersuchung der effektiven Gaspermeabilität von feinen Schüttungen. (2016). (Bachelorarbeit).
    7. Analyse eines modifizierten, vertikal integrierten Modells. (2016). (Bachelorarbeit).
    8. Modellierung des Strömungsübergangs am porösen Medium für Filterelemente. (2016). (Masterthesis).
    9. Investigation of a nonlinear Multi-Point Flux Approximation in DuMuX. (2016). (Forschungsmodul).
    10. Numerical and experimental investigation of soil-root interactions. (2016). (Masterthesis).
    11. Untersuchung und Weiterentwicklung der in DuMuX implementierten Flachwassergleichungen. (2016). (Bachelorarbeit).
    12. Entwicklung von Kopplungskriterien zur adaptiven Bestimmung des VE-Bereichs in einem gekoppelten Modell. (2016). (Bachelorarbeit).
    13. Modeling the espresso brewing process using a non-isothermal, compositional two-phase approach with dissolution kinetics. (2016). (Masterthesis).
    14. Development and Evaluation of Iterative Solution Strategies for Coupled Stokes-Darcy Problems. (2016). (Masterthesis).
  9. 2015

    1. Charakterisierung, Auswahl und Untersuchung von Spacern für die Membrandestillation. (2015). (Masterthesis).
    2. Numerical modeling of salt precipitation around gas wells and its influence on the methane extraction rates. (2015). (Independent-Study).
    3. Numerical Modeling of Peripheral Arterial Stenoses and Evaluation of Compensation Mechanisms. (2015). (Masterthesis).
    4. Comparison of different methods for solving elliptic pressure equations in heterogeneous anisotropic porous media. (2015). (Bachelorarbeit).
    5. Untersuchungen zu Möglichkeiten der Wärmespeicherung bei der adiabaten Druckluftspeicherung. (2015). (Bachelorarbeit).
    6. Numerical modeling of steam chamber build-up guided by hot-water pre-injection. (2015). (Masterthesis).
    7. Fundamentals of multiphase flow in porous media. (2015). (Projektarbeit).
    8. Behaviors of air bubbles in drinking water pipelines: Experimental investigation. (2015). (Masterthesis).
    9. Simulating Complex Flow in Karst: Numerical Upscaling through Calibration of a Double Continuum Model. (2015). (Bachelorarbeit).
    10. Entwicklung und Auslegung eines thermischen Frostschutzverfahrens. (2015). (Bachelorarbeit).
    11. Development of a model for microbially enhanced coalbed methane. (2015). (Masterthesis).
    12. General theory of three-dimensional consolidation. (2015). (Seminararbeit).
    13. Investigation of an adaptive cell-centerd finite volume scheme with application to soil-root interaction. (2015). (Masterthesis).
    14. Experimentelle Untersuchung der Luftausgasung von Flüssigkeiten. (2015). (Masterthesis).
    15. Pitzer-Ansatz für den reaktiven transport und Vergleich mit dem standard Debey-Hückle-Modell. (2015). (Bachelorarbeit).
    16. Numerische Untersuchung des Einflusses von Heterogenitäten im porösen Medium auf mikrobiell induzierte Kalzitausfällung. (2015). (Bachelorarbeit).
    17. Steam Assisted Gravity Drainage - Comparison of continuous and cyclic injection on field and laboratory scale. (2015). (Diplomarbeit).
    18. Investigation of the influence of hysteresis on underground gas storage. (2015). (Bachelorarbeit).
    19. Domain Decomposition Methods For Partial Differential Equations. (2015). (Seminararbeit).
    20. Hierarchical Fracture Modeling Approach. (2015). (Masterthesis).
  10. 2014

    1. Comparison Of Models For Fracture Tips. (2014). (Bachelorarbeit).
    2. Kinetic approach for modeling salt precipitation in porous-media. (2014). (Independent-Study).
    3. Analysis of Processes and Properties at a Porous-Medium Free-Flow Interface with the Application of Evaporation. (2014). (Masterthesis).
    4. Spatial model coupling for the simulation of CO2 injection scenarios in deep saline aquifers. (2014). (Masterthesis).
    5. Methane and Ethane sorption on shale. (2014). (Masterthesis).
    6. Study on porous medium wall functions for k-epsilon and k-omega turbulence models. (2014). (Bachelorarbeit).
    7. Investigation of error estimates for cell centered finite volume schemes: analysis and improvement of grid adaptation strategies in DuMuX. (2014). (Masterthesis).
    8. Composite Programming als Methode zur Konfliktanalyse. Das Fallbeispiel Polder Waldsee/Altrip/Neuhofen. (2014). (Bachelorarbeit).
    9. Analytical Solution for Determining Brine Leakage Along a Salt Wall. (2014). (Bachelorarbeit).
    10. Implementation of advanced algebraic turbulence models on a staggered grid. (2014). (Masterthesis).
    11. Three Phase (Water, Air, and NAPL) Modeling of Bail-Down Test. (2014). (Masterthesis).
    12. Numerical investigation of microbially induced calcite precipitation at field scale. (2014). (Independent-Study).
    13. Numerical modeling and analysis of groundwater recharge in a wadi system for efficient water management. (2014). (Masterthesis).
    14. Coupling a vascular graph model and the surrounding tissue to simulate flow processes in vascular networks. (2014). (Masterthesis).
    15. Verifikationsproblem mit bekannter Lösung für die Zwei-Phasen-Darcy-Gleichung. (2014). (Bachelorarbeit).
    16. Bayesian networks as decision support tool for inspection and replacement of water distribution systems. (2014). (Masterthesis).
    17. Kinetic approach to model salt precipitation in porous-media coupled with the free-flow. (2014). (Masterthesis).
    18. Investigation of a decoupling scheme for modeling reactive transport. (2014). (Masterthesis).
    19. Calibration of a complex MODFLOW-based surface water-groundwater model: A case study for the polder IMO. (2014). (Masterthesis).
    20. Numerical Analysis of Modeling Concepts for Salt Precipitation and Porosity - Permeability Evolution during Brine Evaporation. (2014). (Masterthesis).
    21. Bürgerbeteiligung als Lösungsweg raumbezogener Konflikte? Eine Analyse am Beispiel der Hochwasserrückhaltung Elzmündung am Oberrhein. (2014). (Bachelorarbeit).
    22. A conceptional approach to the effect of shear failure on the stress field in porous media. (2014). (Masterthesis).
    23. Wetting properties in porous media: Analysis of the influence on evaporation and radiative heat exchange. (2014). (Bachelorarbeit).
  11. 2013

    1. Rechenzeitoptimierung bei numerischen Sicherheitsabschätzungen für Atommüll-Endlager. (2013). (Diplomarbeit).
    2. Flow Modelling of Coupled Fracture-Matrix Porous Media Systems with a Two Mesh Concept. (2013). (Diplomarbeit).
    3. Investigating the influence of relative permeability on DNAPL dissolution and depletion at contaminated sites. (2013). (Masterthesis).
    4. Analysis of modeling concepts for radiative heat exchange during evaporation processes from porous media. (2013). (Bachelorarbeit).
    5. Stochastic Investigation of the Thermal Behavior of Lithium-Ion Batteries. (2013). (Diplomarbeit).
    6. Einfluss von Grenzschichten auf das Strömungsverhalten. (2013). (Seminararbeit).
    7. Modeling water management in PEM fuel cells using Dumux. (2013). (Bachelorarbeit).
    8. Numerical simulations of geomechanical processes - Verification of a poro-elastic model on the basis of a literature study. (2013). (Bachelorarbeit).
    9. Impact of transient flow considerations on probabilistic well-head protection delineation. (2013). (Masterthesis).
    10. Extending a fracture-matrix model towards Forchheimer flow in the fracture network. (2013). (Independent-Study).
    11. Modeling Flow and Diffusion along a Salt Flank. (2013). (Bachelorarbeit).
    12. Optimizing early-warning monitoring systems for improved drinking water resource protection. (2013). (Masterthesis).
    13. Comparison of different modelling approaches for reactive transport in porous media. (2013). (Bachelorarbeit).
    14. Modeling transvascular flow - Analysing the influence of adsorption, degradation and lymph flow. (2013). (Studienarbeit).
    15. Coupling of porous-medium and free flow under non-equilibrium conditions. (2013). (Bachelorarbeit).
    16. Analytische Berechnung der Jacobimatrix für das nicht-lineare diskrete Gleichungssystem einer Zwei-Phasen-Darcyströmung: Implementierung und Vergleich mit der näherungsweisen Berechnung. (2013). (Bachelorarbeit).
    17. CO2 as a working fluid in geothermal power plants:Literature review, summary and outlook. (2013). (Studienarbeit).
    18. Quantitative Risikoabschätzung und Risikomanagement in einem Grundwassereinzugsgebiet am Beispiel Burgberg. (2013). (Diplomarbeit).
    19. Modellierung und Simulation arterieller Netzwerke. (2013). (Masterthesis).
    20. Modeling transvascular exchanges of therapeutic agents - Sensitivity analysis. (2013). (Studienarbeit).
    21. Comparison of Monolithic and Iterative Solvers for Coupled Fracture-Network Rock-Matrix Porous Media Problems. (2013). (Bachelorarbeit).
    22. A comparison of different model reduction techniques for model calibration and risk assessment. (2013). (Diplomarbeit).
    23. Parameter Study and a Comparison of Different Model Approaches for Simulating the Displacement of Brine and Fracking Fluid Into Overlying Aquifers. (2013). (Diplomarbeit).
    24. Implementation of Element Velocities in a pressure Model for Fractured Porous Media. (2013). (Independent-Study).
  12. 2012

    1. Coupling of Free Flow and Flow in Porous Media - Dimensional Analysis and Numerical Investigation. (2012). (Masterthesis).
    2. Forchheimer porous-media flow models - Numerical investigation and comparison with experimental data. (2012). (Masterthesis).
    3. Modellierung und experimentelle Untersuchung der Permeabilität von Pulverschüttungen. (2012). (Diplomarbeit).
    4. A Response Surface Bootstrap Filter To Calibrate CO2 Injection Models. (2012). (Diplomarbeit).
    5. Untersuchung strömungsmechanischer und thermischer Vorgänge innerhalb des Absorberrohrs eines salzbasierten Parabolrinnenkraftwerks. (2012). (Diplomarbeit).
    6. Flow in unsaturated porous media: Numerical and experimental evaluation of the two-phase model and the Richards equation. (2012). (Masterthesis).
    7. Efficient History Matching for Reduced Reservoir Models with PCE-based Bootstrap Filters. (2012). (Diplomarbeit).
    8. Numerical simulation of CO2-leakage scenarios on a large scale under realistic geologic conditions. (2012). (Diplomarbeit).
    9. Experimental Investigations of Water Infiltration into Unsaturated Soil - Analysis of Dynamic Capillarity Effects. (2012). (Diplomarbeit).
    10. A Lagrangian Smoothed Particle Framework to Simulate DNAPL Dissolution Pheomena in Subsurface Porous Media. (2012). (Masterthesis).
    11. Numerical analysis of the influence of turbulence on exchange processes between porous-medium and free flow. (2012). (Diplomarbeit).
    12. Investigation of the influences of different refinement approaches in the modelling of multiphase flow in porous media. (2012). (Diplomarbeit).
    13. The influence of different geological layers and in-situ stress states on the geomechanical processes during CO2 storage. (2012). (Diplomarbeit).
    14. Inspecting endovascular aneurysm treatments with porous medium flow simulations and the use of a statistical framework. (2012). (Diplomarbeit).
  13. 2011

    1. Coupling of Free Flow and Flow in Porous Media - A Dimensional Analysis. (2011). (Independent-Study).
    2. Steam Injection Technique for In Situ Remediation of Chlorinated Hydrocarbons from Low Permeable Saturated Zones - Experiment and Numerical Approach. (2011). (Diplomarbeit).
    3. Optimaler Einsatz von Rechenleistung bei alternativen Modellvereinfachungen am Beispiel eines Grundwassermodells. (2011). (Diplomarbeit).
    4. Simulation der Konvektionsströmung bei der Speicherung von CO2 in tiefen Gesteinsformationen. (2011). (Bachelorarbeit).
    5. Optimization of a Calibration Method for Heterogeneous Groundwater Models. (2011). (Diplomarbeit).
    6. Dimensionless Analysis of Convection Enhanced Drug Delivery to Brain Tissues. (2011). (Masterthesis).
    7. Adaptive grid refinement for two phase flow in porous media. (2011). (Diplomarbeit).
    8. Investigation on changing pressures in a saline aquifer before CO2-injection. (2011). (Studienarbeit).
    9. Vereinfachte Methoden zur Flutwellenabschätzung. (2011). (Bachelorarbeit).
    10. Implementation of a Reactive Multi-Component Transport Model for the Lime-Carbonic Acid Balance in Dumux. (2011). (Diplomarbeit).
    11. Risikoanalyse für Wasserschutzgebiete am Beispiel Burgberg. (2011). (Diplomarbeit).
    12. Horizontal Redistribution of Two Fluid Phases in a Porous Medium - Experimental and Numerical Investigations. (2011). (Diplomarbeit).
    13. Theoretisch-numerische Arbeit zum Thema Verdampfung in Mikrokanälen. (2011). (Diplomarbeit).
    14. Untersuchung und Simulationen zum Strömungs- und Verweilzeitverhalten eines Zwischenbehälters in der Wasserversorgung. (2011). (Diplomarbeit).
    15. Modelling biofilm induced calcite precipitation and its effect on two phase flow in porous media. (2011). (Diplomarbeit).
    16. Two phase flow in homogeneous porous media - The role of dynamic capillary pressure in modeling gravity driven fingering. (2011). (Diplomarbeit).
    17. Gefährdungsanalyse und Risikoabschätzung zum Schutz von Trinkwasservorkommen am Beispiel Burgberg. (2011). (Diplomarbeit).
    18. Numerical reduction and numerical simulation of transport processes in blood vessels with bifurcations. (2011). (Diplomarbeit).
  14. 2010

    1. Modellierung des Transports von Ölteppichen in Seen am Beispiel des Bodensees. (2010). (Diplomarbeit).
    2. Cyclic Steam Injection into the Subsurface - solarthermal steam generation for enhanced oil recovery. (2010). (Diplomarbeit).
    3. Stochastic multi-scale simulation of porous media flow with Polynomial Chaos Expansion. (2010). (Diplomarbeit).
    4. Modeling of infiltration processes in the unsaturated zone - switching of boundary condition from Neumann to Dirichlet -. (2010). (Independent-Study).
    5. Modelling biofilm distribution and its effect on two-phase flow in porous media. (2010). (Studienarbeit).
    6. Parameter Estimation by Ensemble Kalman Filters with Transformed Data. (2010). (Diplomarbeit).
    7. Horizontal Redistribution of Two Fluid Phases in a Porous Medium - Experimental and Numerical Investigations. (2010). (Diplomarbeit).
  15. 2009

    1. Determination of Interfacial Area - Capillary Pressure - Saturation Relationships for a Single Fracture: Study, Upscaling, and Determination. (2009). (Diplomarbeit).
    2. Modeling Convection-Enhanced Delivery into Brain Tissue using Information from Magnetic Resonance Imaging. (2009). (Masterthesis).
    3. Modellierung des Abwassernetzes der Oase Beni Abbes, Algerien. (2009). (Diplomarbeit).
    4. Numerical solution of Philip’s redistribution problem. (2009). (Diplomarbeit).
    5. Modeling the transfer of therapeutic agents from the vascular space to the tissue compartment (a continuum approach). (2009). (Diplomarbeit).
    6. CO2 sequestration simulations: A comparison study between DuMuX and Eclipse. (2009). (Diplomarbeit).
    7. Modelling Carbon Dioxide Flow in the Shallow Subsurface. (2009). (Diplomarbeit).
    8. Numerical modeling of enhanced gas recovery with CO2 storage - Primary variable switch -. (2009). (Diplomarbeit).
    9. Examination of the assumption of thermal equilibrium on the fluid distribution and front stability. (2009). (Diplomarbeit).
    10. Two-phase flow modeling in porous media with kinetic interphase mass transfer processes in fractures. (2009). (Diplomarbeit).
  16. 2008

    1. Beschreibung und Quantifizierung der Wechselwirkungen zwischen Grundwasserkörper, Baggersee und Drainagegräben im Rahmen einer 3D Strömungs- und Transportmodellierung. (2008). (Diplomarbeit).
    2. Contaminant Transport in Lake Constance: Analysis of Moments and the Dilution Index. (2008). (Diplomarbeit).
    3. A double-continuum approach for two-phase flow in macroporous media: Parameter study and applications. (2008). (Diplomarbeit).
    4. Modeling the Spatial and Temporal Distribution of Therapeutic Agents in Tumor Tissue (a Continuum Approach). (2008). (Diplomarbeit).
    5. The use of natural heat as a tracer to quantify groundwater surface water interactions: Maules Creek, New South Wales, Australia. (2008). (Diplomarbeit).
    6. Weiterentwicklung einer Finite-Volumen-Methode für die Flachwassergleichungen zur Simulation des Oberflächenabflusses im Gewässer und im Gelände. (2008). (Diplomarbeit).
    7. Numerical Simulations of CO2 Injection into Saline Aquifers: Estimation of Storage Capacity and Arrival Times using Multiple Realizations of Heterogeneous Permeability Fields. (2008). (Diplomarbeit).
    8. Implementation and Application of a Hysteresis Model for Multiphase Flow and Transport in Porous Media. (2008). (Diplomarbeit).
    9. Experimentelle Untersuchungen der Prozesse auf technischer Skala bei der In-situ-Reinigung gering durchlässiger, gesättigter Böden mit festen Wärmequellen. (2008). (Diplomarbeit).
    10. Comparison of mathematical and numerical models for twophase flow in porous media. (2008). (Diplomarbeit).
    11. Towards a model concept for coupling porous gas diffusion layer and gas distributor in PEM fuel cells. (2008). (Diplomarbeit).
  17. 2007

    1. Numerical Investigations of Flow through Fractured Porous Media. (2007). (Masterthesis).
    2. Stochastische Modellierung und hydrogeologische Charakterisierung von Karstgrundwasserleitern. (2007). (Diplomarbeit).
    3. Erarbeitung und Implementierung eines Modellkonzepts zur Simulation von Strömungs- und Transportprozessen im menschlichen Gehirn. (2007). (Diplomarbeit).
    4. Investigations of Carbon Dioxide Storage Capacity in Saline Aquifers. (2007). (Diplomarbeit).
    5. CO2 Storage into Dipped Saline Aquifers Including Ambient Water Flow. (2007). (Diplomarbeit).
    6. Saturation Determination for Multiphase Systems in Porous Medium Using Light Transmission Method. (2007). (Independent-Study).
    7. The development of a single phase multicomponent model with sorption for the analysis of methane migration from subsurface coal seams. (2007). (Masterthesis).
    8. Simulation der Wasserqualität im Bodensee mit Hilfe eines dreidimensionalen Modells. (2007). (Diplomarbeit).
    9. The influende on mixing in a lake of an internal boundary layer for the wind. (2007). (Independent-Study).
    10. Characterisation of tracer distribution in a lake using spatial moments. (2007). (Independent-Study).
    11. Characterisation of tracer distribution in Upper Lake Constance using spatial moments. (2007). (Studienarbeit).
    12. Implementation of a Stochastic Wind Model into the Virtual WaterWay (VWW) Program. (2007). (Masterthesis).
    13. Investigations on Flow Processes in Absorbent Products using FeFlow Finite Element Software. (2007). (Diplomarbeit).
  18. 2006

    1. Numerical study on solute mixing in thermally induced buoyancy flow in groundwater. (2006). (Masterthesis).
    2. Investigation on macrodispersion for two-phase flow in heterogeneous porous media. (2006). (Masterthesis).
    3. Prinzipstudie zur CO2-Migration im Untergrund in Bezug auf die Mineralwässer Stuttgarts. (2006). (Diplomarbeit).
    4. Efficient Spectral Methods for Geostatistical Interpolation. (2006). (Diplomarbeit).
    5. Modeling of CO2 Sequestration: Carbon Dioxide Entry Behaviour at the Cap Rock. (2006). (Studienarbeit).
  19. 2005

    1. Untersuchung von Randbedingungen bei der numerischen Simulation von Zweiphasenströmungen in porösen Medien. (2005). (Diplomarbeit).
    2. Using the moving mesh feature to simulate the unsteady electrostatic spray painting produced by a high-speed rotary bell atomizer with the external charge. (2005). (Masterthesis).
    3. Physical Aspects in the Numerical Modeling of Carbon-Dioxide Sequestration. (2005). (Masterthesis).
    4. Thermal Effects of Carbon Dioxide Sequestration in the Subsurface. (2005). (Diplomarbeit).
    5. Sensitivity Analysis of flow and fracture parameters in fractured porous medium. (2005). (Masterthesis).
    6. Entwicklung und Implementierung eines numerischen Modellkonzepts zur Simulation von Alkoholspülungsprozessen in DNAPL-kontaminierten Grundwasserleitern. (2005). (Diplomarbeit).
    7. Einfluss von Heterogenitäten auf Mehrphasenströmungen. (2005). (Diplomarbeit).
    8. Identification of a REV for a given upscaling method. (2005). (Masterthesis).
    9. Modelling of Multiphase Multicomponent Flow and Transport in Heap Leaching of Copper Ores. (2005). (Masterthesis).
    10. Numerical Modeling of Methane Adsorption and Transport Processes in Mined Areas. (2005). (Masterthesis).
    11. Experimental and numerical investigations on steam injection in saturated soils. (2005). (Masterthesis).
  20. 2004

    1. Effects of groundwater density on CO2 migration in the subsurface. (2004). (Independent-Study).
    2. Interpretation of simulation results including a dynamic capillary pressure relationship. (2004). (Masterthesis).
    3. Evaluation of CO2 velocity changes in a CO2 plume migrating in the subsurface. (2004). (Independent-Study).
    4. Steam- and steam-air-injection in the saturated zone: experimental and numerical investigations on DNAPL-mobilization and heat front behaviour. (2004). (Masterthesis).
    5. Modeling of CO2 Injection in Geological Formations: The Effect of Dissolved CO2 on Water Density. (2004). (Independent-Study).
    6. Inverse modeling of groundwater transport using temporal moments of concentration. (2004). (Masterthesis).
    7. Influence of Seasonal Stratification Patterns on the Basin-Scale Motions of Upper Lake Constance. (2004). (Masterthesis).
    8. The Influence of the Intrinsic Permeability and the van Genuchten Parameters on Small-Scale Simulation Results. (2004). (Masterthesis).
    9. Simultaneous geostatistical identification of conductivity and recharge parameters in the groundwater flow equation. (2004). (Masterthesis).
    10. Modeling of Natural Attenuation: Evaluation of Available Codes. (2004). (Independent-Study).
    11. Development of a Finite Element model for a cylindrical device for the determination of the hydraulic conductivity tensor. (2004). (Masterthesis).
    12. Parametrisierung von Buhnen in 2D-HN-Modellen anhand numerischer Modellrechnungen und Naturdaten der Donau. (2004). (Diplomarbeit).
    13. Parameter study for the migration of DNAPL around a sand lens. (2004). (Independent-Study).
    14. Modeling of Mine Gas Repositories. (2004). (Masterthesis).
  21. 2003

    1. Numerische und experimentelle Untersuchung des Einflusses der Sensorheizung auf den Wärmeübergang an Abgassensoren. (2003). (Diplomarbeit).
    2. Nachbildung und Normalisierung von Tracersummenkurven. (2003). (Diplomarbeit).
    3. Estimation en temps reel de la biodegradation d’un polluant dans un sol non-sature-stude en colonne. (2003). (Bachelorarbeit).
    4. Artificial Groundwater Recharge. (2003). (Independent-Study).
    5. Experimental determination of transverse dispersion coefficients in porous media. (2003). (Masterthesis).
    6. Nitratdynamik im Grundwassereinzugsgebiet Rheinau - Erweiterung des Modells und Simulation des Stofftransports. (2003). (Diplomarbeit).
To the top of the page