Position within the page tree

Home
Institute
Team
Weishaupt, Kilian

Kilian Weishaupt

Dr.-Ing.

Departure in January 2022

Contact

Office Hours

2012: Bachelor of Science in Environmental Engineering, University of Stuttgart
2015: Master of Science in Environmental Engineering, University of Stuttgart
2020: Doctoral Degree (Dr.-Ing.), University of Stuttgart

Academic Career

2015 - 2020: Research Associate (doctoral student), Department of Hydromechanics and Modelling of Hydrosystems, University of Stuttgart
since April 2020: Research Associate (postdoctoral researcher), Department of Hydromechanics and Modelling of Hydrosystems, University of Stuttgart

Awards and Recognitions

2013/2014: Deutschlandstipendium
2017: InterPore Rosette, International Society for Porous Media

Miscellaneous

Organization of Teaching
ERASMUS-Coordinator

Publications

(Journal-) Articles
1. Michalkowski, C., Weishaupt, K., Schleper, V., & Helmig, R. (2022). Modeling of Two Phase Flow in a Hydrophobic Porous Medium Interacting with a Hydrophilic Structure. Transport in Porous Media, 144(2), Article 2. https://doi.org/10.1007/s11242-022-01816-1
  Abstract
  Fluid flow through layered materials with different wetting behavior is observed in a wide range of applications in biological, environmental and technical systems. Therefore, it is necessary to understand the occuring transport mechanisms of the fluids at the interface between the layered constituents. Of special interest is the water transport in polymer electrolyte membrane fuel cells. Here, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. This is crucial to choose optimal operating conditions and improve the overall cell performance. Pore-scale modeling of gas diffusion layers (GDLs) and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the hydrophobic porous GDL and the hydrophilic gas distributor, a particular challenge is the combination and interaction of the different material structures and wetting properties at the interface and its influence on the flow. In this paper, a modeling approach is presented which captures the influence of a hydrophilic domain on the flow in a hydrophobic porous domain at the interface between the two domains. A pore-network model is used as the basis of the developed concept which is extended to allow the modeling of mixed-wet interactions at the interface. The functionality of the model is demonstrated using basic example configurations with one and several interface pores and it is applied to a realistic GDL representation in contact with a channel-land structured gas distributor.
  BibTeX
  @article{michalkowski_modeling_2022, abstract = {Fluid flow through layered materials with different wetting behavior is observed in a wide range of applications in biological, environmental and technical systems. Therefore, it is necessary to understand the occuring transport mechanisms of the fluids at the interface between the layered constituents. Of special interest is the water transport in polymer electrolyte membrane fuel cells. Here, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. This is crucial to choose optimal operating conditions and improve the overall cell performance. Pore-scale modeling of gas diffusion layers (GDLs) and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the hydrophobic porous GDL and the hydrophilic gas distributor, a particular challenge is the combination and interaction of the different material structures and wetting properties at the interface and its influence on the flow. In this paper, a modeling approach is presented which captures the influence of a hydrophilic domain on the flow in a hydrophobic porous domain at the interface between the two domains. A pore-network model is used as the basis of the developed concept which is extended to allow the modeling of mixed-wet interactions at the interface. The functionality of the model is demonstrated using basic example configurations with one and several interface pores and it is applied to a realistic GDL representation in contact with a channel-land structured gas distributor.}, author = {Michalkowski, Cynthia and Weishaupt, Kilian and Schleper, Veronika and Helmig, Rainer}, doi = {10.1007/s11242-022-01816-1}, issn = {1573-1634}, journal = {Transport in Porous Media}, month = {09}, number = 2, pages = {481--506}, title = {Modeling of Two Phase Flow in a Hydrophobic Porous Medium Interacting with a Hydrophilic Structure}, url = {https://doi.org/10.1007/s11242-022-01816-1}, volume = 144, year = 2022 }
  Link
  https://doi.org/10.1007/s11242-022-01816-1
2. Weishaupt, K., Koch, T., & Helmig, R. (2022). A fully implicit coupled pore-network/free-flow model for the pore-scale simulation of drying processes. Drying Technology, 40(4), Article 4. https://doi.org/10.1080/07373937.2021.1955706
  Abstract
  We present a fully coupled pore-network/free-flow model providing pore-scale insight into drying processes. We solve the Navier–Stokes equations with component transport in the free-flow region, coupled to a dynamic two-phase, two-component pore-network model (PNM) in the porous domain. The dynamic multi-physics model allows to temporally resolve drying processes in-between capillary equilibrium states. All simulations are non-isothermal and use pressure- and temperature-depended fluid properties. Carefully chosen coupling conditions and a monolithic solver ensure local conservation of mass, momentum, and energy fluxes, in particular at the interface between both model domains. We solve for wetting and non-wetting fluid pressure fields and consider advective gas transport in the network. Numerical examples demonstrate that the coupled model is able to cover a wide range of physical processes relevant for drying and show the mutual interaction of the two subregions. The model is implemented in the modular open-source framework DuMux such that extensions are straight-forward.
  BibTeX
  @article{doi:10.1080/07373937.2021.1955706, abstract = { We present a fully coupled pore-network/free-flow model providing pore-scale insight into drying processes. We solve the Navier–Stokes equations with component transport in the free-flow region, coupled to a dynamic two-phase, two-component pore-network model (PNM) in the porous domain. The dynamic multi-physics model allows to temporally resolve drying processes in-between capillary equilibrium states. All simulations are non-isothermal and use pressure- and temperature-depended fluid properties. Carefully chosen coupling conditions and a monolithic solver ensure local conservation of mass, momentum, and energy fluxes, in particular at the interface between both model domains. We solve for wetting and non-wetting fluid pressure fields and consider advective gas transport in the network. Numerical examples demonstrate that the coupled model is able to cover a wide range of physical processes relevant for drying and show the mutual interaction of the two subregions. The model is implemented in the modular open-source framework DuMux such that extensions are straight-forward. }, author = {Weishaupt, Kilian and Koch, Timo and Helmig, Rainer}, doi = {10.1080/07373937.2021.1955706}, eprint = {https://doi.org/10.1080/07373937.2021.1955706}, journal = {Drying Technology}, month = {08}, number = 4, pages = {697-718}, publisher = {Taylor & Francis}, title = {A fully implicit coupled pore-network/free-flow model for the pore-scale simulation of drying processes}, url = {/brokenurl# https://doi.org/10.1080/07373937.2021.1955706 }, volume = 40, year = 2022 }
  Link
  /brokenurl# https://doi.org/10.1080/07373937.2021.1955706
3. Weishaupt, K., Koch, T., & Helmig, R. (2021). A fully implicit coupled pore-network/free-flow model for the pore-scale simulation of drying processes. Drying Technology, 0(0), Article 0. https://doi.org/10.1080/07373937.2021.1955706
  Abstract
  We present a fully coupled pore-network/free-flow model providing pore-scale insight into drying processes. We solve the Navier–Stokes equations with component transport in the free-flow region, coupled to a dynamic two-phase, two-component pore-network model (PNM) in the porous domain. The dynamic multi-physics model allows to temporally resolve drying processes in-between capillary equilibrium states. All simulations are non-isothermal and use pressure- and temperature-depended fluid properties. Carefully chosen coupling conditions and a monolithic solver ensure local conservation of mass, momentum, and energy fluxes, in particular at the interface between both model domains. We solve for wetting and non-wetting fluid pressure fields and consider advective gas transport in the network. Numerical examples demonstrate that the coupled model is able to cover a wide range of physical processes relevant for drying and show the mutual interaction of the two subregions. The model is implemented in the modular open-source framework DuMux such that extensions are straight-forward.
  BibTeX
  @article{weishaupt2021, abstract = { We present a fully coupled pore-network/free-flow model providing pore-scale insight into drying processes. We solve the Navier–Stokes equations with component transport in the free-flow region, coupled to a dynamic two-phase, two-component pore-network model (PNM) in the porous domain. The dynamic multi-physics model allows to temporally resolve drying processes in-between capillary equilibrium states. All simulations are non-isothermal and use pressure- and temperature-depended fluid properties. Carefully chosen coupling conditions and a monolithic solver ensure local conservation of mass, momentum, and energy fluxes, in particular at the interface between both model domains. We solve for wetting and non-wetting fluid pressure fields and consider advective gas transport in the network. Numerical examples demonstrate that the coupled model is able to cover a wide range of physical processes relevant for drying and show the mutual interaction of the two subregions. The model is implemented in the modular open-source framework DuMux such that extensions are straight-forward. }, author = {Weishaupt, Kilian and Koch, Timo and Helmig, Rainer}, doi = {10.1080/07373937.2021.1955706}, eprint = {https://doi.org/10.1080/07373937.2021.1955706}, journal = {Drying Technology}, month = {04}, number = 0, pages = {1--22}, publisher = {Informa {UK} Limited}, title = {A fully implicit coupled pore-network/free-flow model for the pore-scale simulation of drying processes}, url = {https://doi.org/10.1080/07373937.2021.1955706}, volume = 0, year = 2021 }
  Link
  https://doi.org/10.1080/07373937.2021.1955706
4. Koch, T., Gläser, D., Weishaupt, K., Ackermann, S., Beck, M., Becker, B., Burbulla, S., Class, H., Coltman, E., Emmert, S., Fetzer, T., Grüninger, C., Heck, K., Hommel, J., Kurz, T., Lipp, M., Mohammadi, F., Scherrer, S., Schneider, M., … Flemisch, B. (2021). DuMux 3 – an open-source simulator for solving flow and transport problems in porous media with a focus on model coupling. Computers & Mathematics with Applications. https://doi.org/10.1016/j.camwa.2020.02.012
  Abstract
  We present version 3 of the open-source simulator for flow and transport processes in porous media DuMux. DuMux is based on the modular C++ framework Dune (Distributed and Unified Numerics Environment) and is developed as a research code with a focus on modularity and reusability. We describe recent efforts in improving the transparency and efficiency of the development process and community-building, as well as efforts towards quality assurance and reproducible research. In addition to a major redesign of many simulation components in order to facilitate setting up complex simulations in DuMux, version 3 introduces a more consistent abstraction of finite volume schemes. Finally, the new framework for multi-domain simulations is described, and three numerical examples demonstrate its flexibility.
  BibTeX
  @article{Version3Dumux, abstract = {We present version 3 of the open-source simulator for flow and transport processes in porous media DuMux. DuMux is based on the modular C++ framework Dune (Distributed and Unified Numerics Environment) and is developed as a research code with a focus on modularity and reusability. We describe recent efforts in improving the transparency and efficiency of the development process and community-building, as well as efforts towards quality assurance and reproducible research. In addition to a major redesign of many simulation components in order to facilitate setting up complex simulations in DuMux, version 3 introduces a more consistent abstraction of finite volume schemes. Finally, the new framework for multi-domain simulations is described, and three numerical examples demonstrate its flexibility.}, author = {Koch, Timo and Gl\"{a}ser, Dennis and Weishaupt, Kilian and Ackermann, Sina and Beck, Martin and Becker, Beatrix and Burbulla, Samuel and Class, Holger and Coltman, Edward and Emmert, Simon and Fetzer, Thomas and Gr\"{u}ninger, Christoph and Heck, Katharina and Hommel, Johannes and Kurz, Theresa and Lipp, Melanie and Mohammadi, Farid and Scherrer, Samuel and Schneider, Martin and Seitz, Gabriele and Stadler, Leopold and Utz, Martin and Weinhardt, Felix and Flemisch, Bernd}, doi = {10.1016/j.camwa.2020.02.012}, issn = {0898-1221}, journal = {Computers {\&} Mathematics with Applications}, month = {01}, publisher = {Elsevier {BV}}, title = {{DuMux} 3 {\textendash} an open-source simulator for solving flow and transport problems in porous media with a focus on model coupling}, url = {https://doi.org/10.1016/j.camwa.2020.02.012}, year = 2021 }
  Link
  https://doi.org/10.1016/j.camwa.2020.02.012
5. Koch, T., Weishaupt, K., Müller, J., Weigand, B., & Helmig, R. (2021). A (Dual) Network Model for Heat Transfer in Porous Media. Transport in Porous Media, 140(1), Article 1. https://doi.org/10.1007/s11242-021-01602-5
  Abstract
  We present a dual network model to simulate coupled single-phase flow and energy transport in porous media including conditions under which local thermal equilibrium cannot be assumed. The models target applications such as the simulation of catalytic reactors, micro-fluidic experiments, or micro-cooling devices. The new technique is based on a recently developed algorithm that extracts both the pore space and the solid grain matrix of a porous medium from CT images into an interconnected network representation. We simulate coupled heat and mass transfer in these networks simultaneously, allowing naturally to model scenarios with heterogeneous temperature distributions in both void space and solid matrix. The model is compared with 3D conjugate heat transfer simulations for both conduction- and convection-dominated scenarios. It is shown to reproduce effective thermal conductivities over a wide range of fluid to solid thermal conductivity ratios with a single parameter set. Morevoer, it captures local thermal nonequilibrium effects in a micro-cooling device scenario.
  BibTeX
  @article{koch_dual_2021, abstract = {We present a dual network model to simulate coupled single-phase flow and energy transport in porous media including conditions under which local thermal equilibrium cannot be assumed. The models target applications such as the simulation of catalytic reactors, micro-fluidic experiments, or micro-cooling devices. The new technique is based on a recently developed algorithm that extracts both the pore space and the solid grain matrix of a porous medium from CT images into an interconnected network representation. We simulate coupled heat and mass transfer in these networks simultaneously, allowing naturally to model scenarios with heterogeneous temperature distributions in both void space and solid matrix. The model is compared with 3D conjugate heat transfer simulations for both conduction- and convection-dominated scenarios. It is shown to reproduce effective thermal conductivities over a wide range of fluid to solid thermal conductivity ratios with a single parameter set. Morevoer, it captures local thermal nonequilibrium effects in a micro-cooling device scenario.}, author = {Koch, Timo and Weishaupt, Kilian and Müller, Johannes and Weigand, Bernhard and Helmig, Rainer}, doi = {10.1007/s11242-021-01602-5}, issn = {1573-1634}, journal = {Transport in Porous Media}, month = {10}, number = 1, pages = {107--141}, title = {A (Dual) Network Model for Heat Transfer in Porous Media}, url = {https://doi.org/10.1007/s11242-021-01602-5}, volume = 140, year = 2021 }
  Link
  https://doi.org/10.1007/s11242-021-01602-5
6. Schneider, M., Weishaupt, K., Gläser, D., Boon, W. M., & Helmig, R. (2020). Coupling staggered-grid and MPFA finite volume methods for free flow/porous-medium flow problems. Journal of Computational Physics, 401. https://doi.org/10.1016/j.jcp.2019.109012
  - BibTeX
  BibTeX
  @article{schneider.etAl2019, author = {Schneider, M. and Weishaupt, K. and Gläser, D. and Boon, W. M. and Helmig, R.}, doi = {https://doi.org/10.1016/j.jcp.2019.109012}, issn = {0021-9991}, journal = {Journal of Computational Physics}, title = {Coupling staggered-grid and MPFA finite volume methods for free flow/porous-medium flow problems}, volume = 401, year = 2020 }
7. de Winter, M., Weishaupt, K., Scheller, S., Frey, S., Raoof, A., Hassanizadeh, M., & Helmig, R. (2020). The Complexity of Porous Media Flow Characterized in a Microfluidic Model Based on Confocal Laser Scanning Microscopy and Micro-PIV. Transport in Porous Media. https://doi.org/10.1007/s11242-020-01515-9
  Abstract
  In this study, the complexity of a steady-state flow through porous media is revealed using confocal laser scanning microscopy (CLSM). Micro-particle image velocimetry (micro-PIV) is applied to construct movies of colloidal particles. The calculated velocity vector fields from images are further utilized to obtain laminar flow streamlines. Fluid flow through a single straight channel is used to confirm that quantitative CLSM measurements can be conducted. Next, the coupling between the flow in a channel and the movement within an intersecting dead-end region is studied. Quantitative CLSM measurements confirm the numerically determined coupling parameter from earlier work of the authors. The fluid flow complexity is demonstrated using a porous medium consisting of a regular grid of pores in contact with a flowing fluid channel. The porous media structure was further used as the simulation domain for numerical modeling. Both the simulation, based on solving Stokes equations, and the experimental data show presence of non-trivial streamline trajectories across the pore structures. In view of the results, we argue that the hydrodynamic mixing is a combination of non-trivial streamline routing and Brownian motion by pore-scale diffusion. The results provide insight into challenges in upscaling hydrodynamic dispersion from pore scale to representative elementary volume (REV) scale. Furthermore, the successful quantitative validation of CLSM-based data from a microfluidic model fed by an electrical syringe pump provided a valuable benchmark for qualitative validation of computer simulation results.
  BibTeX
  @article{de_winter_complexity_2020, abstract = {In this study, the complexity of a steady-state flow through porous media is revealed using confocal laser scanning microscopy (CLSM). Micro-particle image velocimetry (micro-PIV) is applied to construct movies of colloidal particles. The calculated velocity vector fields from images are further utilized to obtain laminar flow streamlines. Fluid flow through a single straight channel is used to confirm that quantitative CLSM measurements can be conducted. Next, the coupling between the flow in a channel and the movement within an intersecting dead-end region is studied. Quantitative CLSM measurements confirm the numerically determined coupling parameter from earlier work of the authors. The fluid flow complexity is demonstrated using a porous medium consisting of a regular grid of pores in contact with a flowing fluid channel. The porous media structure was further used as the simulation domain for numerical modeling. Both the simulation, based on solving Stokes equations, and the experimental data show presence of non-trivial streamline trajectories across the pore structures. In view of the results, we argue that the hydrodynamic mixing is a combination of non-trivial streamline routing and Brownian motion by pore-scale diffusion. The results provide insight into challenges in upscaling hydrodynamic dispersion from pore scale to representative elementary volume (REV) scale. Furthermore, the successful quantitative validation of CLSM-based data from a microfluidic model fed by an electrical syringe pump provided a valuable benchmark for qualitative validation of computer simulation results.}, author = {de Winter, Matthijs and Weishaupt, Kilian and Scheller, Stefan and Frey, Steffen and Raoof, Amir and Hassanizadeh, Majid and Helmig, Rainer}, doi = {10.1007/s11242-020-01515-9}, issn = {1573-1634}, journal = {Transport in Porous Media}, language = {en}, month = {11}, publisher = {Springer Science and Business Media {LLC}}, title = {The Complexity of Porous Media Flow Characterized in a Microfluidic Model Based on Confocal Laser Scanning Microscopy and Micro-{PIV}}, url = {https://doi.org/10.1007/s11242-020-01515-9}, urldate = {2020-11-27}, year = 2020 }
  Link
  https://doi.org/10.1007/s11242-020-01515-9
8. Class, H., Weishaupt, K., & Trötschler, O. (2020). Experimental and Simulation Study on Validating a Numerical Model for CO2 Density-Driven Dissolution in Water. Water, 12(3), Article 3. https://doi.org/10.3390/w12030738
  Abstract
  Carbon dioxide density-driven dissolution in a water-filled laboratory flume of the dimensions 60 cm length, 40 cm height, 1 cm thickness, was visualized using a pH-sensitive color indicator. We focus on atmospheric pressure conditions, like in caves where CO2 concentrations are typically higher. Varying concentrations of carbon dioxide were applied as boundary conditions at the top of the experimental setup, leading to the onset of convective fingering at differing times. The data were used to validate a numerical model implemented in the numerical simulator DuMux. The model solves the Navier–Stokes equations for density-induced water flow with concentration-dependent fluid density and a transport equation, including advective and diffusive processes for the carbon dioxide dissolved in water. The model was run in 2D, 3D, and pseudo-3D on two different grids. Without any calibration or fitting of parameters, the results of the comparison between experiment and simulation show satisfactory agreement with respect to the onset time of convective fingering, and the number and the dynamics of the fingers. Grid refinement matters, in particular, in the uppermost part where fingers develop. The 2D simulations consistently overestimated the fingering dynamics. This successful validation of the model is the prerequisite for employing it in situations with background flow and for a future study of karstification mechanisms related to CO2-induced fingering in caves.
  BibTeX
  @article{class_experimental_2020, abstract = {Carbon dioxide density-driven dissolution in a water-filled laboratory flume of the dimensions 60 cm length, 40 cm height, 1 cm thickness, was visualized using a pH-sensitive color indicator. We focus on atmospheric pressure conditions, like in caves where CO2 concentrations are typically higher. Varying concentrations of carbon dioxide were applied as boundary conditions at the top of the experimental setup, leading to the onset of convective fingering at differing times. The data were used to validate a numerical model implemented in the numerical simulator DuMux. The model solves the Navier\–Stokes equations for density-induced water flow with concentration-dependent fluid density and a transport equation, including advective and diffusive processes for the carbon dioxide dissolved in water. The model was run in 2D, 3D, and pseudo-3D on two different grids. Without any calibration or fitting of parameters, the results of the comparison between experiment and simulation show satisfactory agreement with respect to the onset time of convective fingering, and the number and the dynamics of the fingers. Grid refinement matters, in particular, in the uppermost part where fingers develop. The 2D simulations consistently overestimated the fingering dynamics. This successful validation of the model is the prerequisite for employing it in situations with background flow and for a future study of karstification mechanisms related to CO2-induced fingering in caves.}, author = {Class, Holger and Weishaupt, Kilian and Trötschler, Oliver}, copyright = {http://creativecommons.org/licenses/by/3.0/}, doi = {10.3390/w12030738}, journal = {Water}, language = {en}, month = {03}, note = {Number: 3 publisher = {{MDPI} {AG}},Publisher: Multidisciplinary Digital Publishing Institute}, number = 3, pages = 738, title = {Experimental and Simulation Study on Validating a Numerical Model for CO2 Density-Driven Dissolution in Water}, url = {https://www.mdpi.com/2073-4441/12/3/738}, urldate = {2020-11-17}, volume = 12, year = 2020 }
  Link
  https://www.mdpi.com/2073-4441/12/3/738
9. Weishaupt, K., Terzis, A., Zarikos, I., Yang, G., Flemisch, B., de Winter, D. A. M., & Helmig, R. (2020). A Hybrid-Dimensional Coupled Pore-Network/Free-Flow Model Including Pore-Scale Slip and Its Application to a Micromodel Experiment. Transport in Porous Media, 135(1), Article 1. https://doi.org/10.1007/s11242-020-01477-y
  - BibTeX
  - Link
  BibTeX
  @article{Weishaupt2020, author = {Weishaupt, K. and Terzis, A. and Zarikos, I. and Yang, G. and Flemisch, B. and de Winter, D. A. M. and Helmig, R.}, doi = {10.1007/s11242-020-01477-y}, journal = {Transport in Porous Media}, month = {09}, number = 1, pages = {243--270}, publisher = {Springer Science and Business Media {LLC}}, title = {A Hybrid-Dimensional Coupled Pore-Network/Free-Flow Model Including Pore-Scale Slip and Its Application to a Micromodel Experiment}, url = {https://doi.org/10.1007/s11242-020-01477-y}, volume = 135, year = 2020 }
  Link
  https://doi.org/10.1007/s11242-020-01477-y
10. Weishaupt, K., Joekar-Niasar, V., & Helmig, R. (2019). An efficient coupling of free flow and porous media flow using the pore-network modeling approach. Journal of Computational Physics: X, 1, 100011. https://doi.org/10.1016/j.jcpx.2019.100011
  - BibTeX
  - Link
  BibTeX
  @article{Weishaupt-Weishaupt-2019-01, author = {Weishaupt, Kilian and Joekar-Niasar, Vahid and Helmig, Rainer}, doi = {10.1016/j.jcpx.2019.100011}, issn = {2590-0552}, journal = {Journal of Computational Physics: X}, month = {01}, pages = 100011, publisher = {Elsevier {BV}}, title = {An efficient coupling of free flow and porous media flow using the pore-network modeling approach}, url = {http://www.sciencedirect.com/science/article/pii/S2590055219300277}, volume = 1, year = 2019 }
  Link
  http://www.sciencedirect.com/science/article/pii/S2590055219300277
11. Yang, G., Coltman, E., Weishaupt, K., Terzis, A., Helmig, R., & Weigand, B. (2019). On the Beavers-Joseph interface condition for non-parallel coupled channel flow over a porous structure at high Reynolds numbers. Transport in Porous Media. https://doi.org/10.1007/s11242-019-01255-5
  - BibTeX
  BibTeX
  @article{NULL, author = {Yang, Guang and Coltman, Edward and Weishaupt, Kilian and Terzis, Alexandros and Helmig, Rainer and Weigand, Bernhard}, doi = {10.1007/s11242-019-01255-5}, journal = {Transport in Porous Media}, month = {02}, note = {, IWS2ID=4510 , Partnerinstitution: Institut für Thermodynamik der Luft- und Raumfahrt (ITLR) , Partneraddress: Stuttgart }, title = {On the Beavers-Joseph interface condition for non-parallel coupled channel flow over a porous structure at high Reynolds numbers}, year = 2019 }
12. Terzis, A., Zarikos, I., Weishaupt, K., Yang, G., Chu, X., Helmig, R., & Weigand, B. (2019). Microscopic velocity field measurements inside a regular porous medium adjacent to a low Reynolds number channel flow. Physics of Fluids, 31(4), Article 4. https://doi.org/10.1063/1.5092169
  - BibTeX
  - Link
  BibTeX
  @article{Weishaupt-Terzis-2019-01, author = {Terzis, A. and Zarikos, I. and Weishaupt, K. and Yang, G. and Chu, X. and Helmig, R. and Weigand, B.}, doi = {10.1063/1.5092169}, issn = {1070-6631}, journal = {Physics of Fluids}, month = {04}, number = 4, pages = 042001, publisher = {{AIP} Publishing}, title = {Microscopic velocity field measurements inside a regular porous medium adjacent to a low Reynolds number channel flow}, url = {https://aip.scitation.org/doi/full/10.1063/1.5092169}, urldate = {2020-01-10}, volume = 31, year = 2019 }
  Link
  https://aip.scitation.org/doi/full/10.1063/1.5092169
13. Koch, T., Gläser, D., Weishaupt, K., Ackermann, S., Beck, M., Becker, B., Burbulla, S., Class, H., Coltman, E., Fetzer, T., Flemisch, B., Grüninger, C., Heck, K., Hommel, J., Kurz, T., Lipp, M., Mohammadi, F., Schneider, M., Seitz, G., … Weinhardt, F. (2018). DuMuX 3.0.0. https://doi.org/10.5281/zenodo.2479595
  - BibTeX
  BibTeX
  @article{koch2018dumux, author = {Koch, Timo and Gläser, Dennis and Weishaupt, Kilian and Ackermann, Sina and Beck, Martin and Becker, Beatrix and Burbulla, S. and Class, Holger and Coltman, Edward and Fetzer, Thomas and Flemisch, Bernd and Grüninger, Christoph and Heck, Katharina and Hommel, Johannes and Kurz, Theresa and Lipp, Melanie and Mohammadi, Farid and Schneider, Martin and Seitz, Gabriele and Scholz, Simon and Weinhardt, Felix}, doi = {10.5281/zenodo.2479595}, title = {DuMuX 3.0.0}, year = 2018 }
14. Terzis, A., Roumeli, E., Weishaupt, K., Brack, S., Aslannejad, H., Groß, J., Hassanizadeh, S. M., Helmig, R., & Weigand, B. (2017). Heat release at the wetting front during capillary filling of cellulosic micro-substrates. Journal of Colloid and Interface Science. https://doi.org/10.1016/j.jcis.2017.06.027
  - BibTeX
  BibTeX
  @article{NULL, author = {Terzis, Alexandros and Roumeli, Eleftheria and Weishaupt, Kilian and Brack, Stefan and Aslannejad, Hamed and Groß, Joachim and Hassanizadeh, S. Majid and Helmig, Rainer and Weigand, Bernhard}, doi = {10.1016/j.jcis.2017.06.027}, journal = {Journal of Colloid and Interface Science}, month = {05}, note = {, IWS2ID=4458 }, title = {Heat release at the wetting front during capillary filling of cellulosic micro-substrates}, year = 2017 }
15. Yang, G., Weigand, B., Terzis, A., Weishaupt, K., & Helmig, R. (2017). Numerical simulation of turbulent flow and heat transfer in a three-dimensional channel coupled with flow through porous structures. Transport in Porous Media, 120. https://doi.org/10.1007/s11242-017-0995-9
  - BibTeX
  BibTeX
  @article{NULL, author = {Yang, Guang and Weigand, Bernhard and Terzis, Alexandros and Weishaupt, Kilian and Helmig, Rainer}, doi = {10.1007/s11242-017-0995-9}, journal = {Transport in Porous Media}, month = {08}, note = {, IWS2ID=4472 , Partnerinstitution: Institut für Thermodynamik der Luft- und Raumfahrt (ITLR) , Partneraddress: Stuttgart }, page = {01--23}, title = {Numerical simulation of turbulent flow and heat transfer in a three-dimensional channel coupled with flow through porous structures}, volume = 120, year = 2017 }
16. Lindner, F., Nuske, P., Weishaupt, K., Helmig, R., Mundt, C., & Pfitzner, M. (2016). Transpiration cooling with local thermal nonequilibrium: Model comparison in multiphase flow in porous media. Journal of Porous Media, 19. https://doi.org/10.1615/JPorMedia.v19.i2.30
  - BibTeX
  - Link
  BibTeX
  @article{NULL, author = {Lindner, Franz and Nuske, Philipp and Weishaupt, Kilian and Helmig, Rainer and Mundt, Christian and Pfitzner, Michael}, doi = {10.1615/JPorMedia.v19.i2.30}, journal = {Journal of Porous Media}, month = {01}, note = {, IWS2ID=4373 }, page = {131-153}, title = {Transpiration cooling with local thermal nonequilibrium: Model comparison in multiphase flow in porous media}, url = {https://www.dl.begellhouse.com/journals/49dcde6d4c0809db,756c5cb610533dc8,29b3011f079da782.html}, volume = 19, year = 2016 }
  Link
  https://www.dl.begellhouse.com/journals/49dcde6d4c0809db,756c5cb610533dc8,29b3011f079da782.html
17. Weishaupt, K., Bordenave, A., Atteia, O., & Class, H. (2016). Numerical Investigation on the Benefits of Preheating for an Increased Thermal Radius of Influence During Steam Injection in Saturated Soil. Transport in Porous Media. https://doi.org/10.1007/s11242-016-0624-z
  - BibTeX
  - Link
  BibTeX
  @article{NULL, author = {Weishaupt, Kilian and Bordenave, Alexandre and Atteia, Olivier and Class, Holger}, doi = {10.1007/s11242-016-0624-z}, journal = {Transport in Porous Media}, month = {01}, note = {, IWS2ID=4343 }, title = {Numerical Investigation on the Benefits of Preheating for an Increased Thermal Radius of Influence During Steam Injection in Saturated Soil}, url = {http://link.springer.com/article/10.1007/s11242-016-0624-z}, year = 2016 }
  Link
  http://link.springer.com/article/10.1007/s11242-016-0624-z
Theses
1. Weishaupt, K. (2015). Numerical modeling of steam chamber build-up guided by hot-water pre-injection [Masterthesis].
  - BibTeX
  BibTeX
  @mastersthesis{NULL, author = {Weishaupt, Kilian}, month = {05}, note = {, IWS2ID=3055 , Institution: Institut für Wasser- und Umweltsystemmodellierung , Address: Universität Stuttgart , Partneraddress: Bordeaux, France }, school = {Universität Stuttgart, Institut für Wasser- und Umweltsystemmodellierung}, title = {Numerical modeling of steam chamber build-up guided by hot-water pre-injection}, type = {Masterthesis}, year = 2015 }
PhDs
1. Weishaupt, K. (2020). Model concepts for coupling free flow with porous medium flow at the pore-network scale : from single-phase flow to compositional non-isothermal two-phase flow [Dissertation, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung]. In Mitteilungen / Institut für Wasser- und Umweltsystemmodellierung, Universität Stuttgart (Vol. 273). https://doi.org/10.18419/opus-10932
  - BibTeX
  - Link
  BibTeX
  @phdthesis{lh2-2020-diss-weishaupt, address = {Stuttgart}, author = {Weishaupt, Kilian}, doi = {10.18419/opus-10932}, eventdate = {2020-03-12}, isbn = {978-3-942036-77-1}, language = {eng}, publisher = {Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung}, school = {Universität Stuttgart}, series = {Mitteilungen / Institut für Wasser- und Umweltsystemmodellierung, Universität Stuttgart}, supervisor = {Helmig, Rainer}, title = {Model concepts for coupling free flow with porous medium flow at the pore-network scale : from single-phase flow to compositional non-isothermal two-phase flow}, type = {Dissertation}, url = {http://elib.uni-stuttgart.de/handle/11682/10949}, volume = 273, year = 2020 }
  Link
  http://elib.uni-stuttgart.de/handle/11682/10949

Talks

Weishaupt, K. (2020). Model concepts for coupling free flow with porous medium flow at the pore-network scale : from single-phase flow to compositional non-isothermal two-phase flow [Dissertation, Eigenverlag des Instituts für Wasser- und Umweltsystemmodellierung]. In Mitteilungen / Institut für Wasser- und Umweltsystemmodellierung, Universität Stuttgart (Vol. 273). https://doi.org/10.18419/opus-10932
- Link
Link
http://elib.uni-stuttgart.de/handle/11682/10949
Weishaupt, K., Koch, T., Joekar-Niasar, V., Hassanizadeh, S. M., & Helmig, R. (2019). Complex Interfaces Between Free Flow and Porous Media Flow. https://www.siam.org/conferences/cm/conference/gs19
- Link
Link
https://www.siam.org/conferences/cm/conference/gs19
Weishaupt, K., & Helmig, R. (2019). Including pore-scale slip velocities at the interface between free flow and a pore-network model: Recalculation of micromodel experiments.
Weishaupt, K., Koch, T., Joekar-Niasar, V., Hassanizadeh, S. M., & Helmig, R. (2019). Complex Interfaces Between Free Flow and Porous Media Flow / SFB1313.
Weishaupt, K., Koch, T., Joekar-Niasar, V., Hassanizadeh, S. M., & Helmig, R. (2018). Coupling free flow and porous-media systems using a pore-network model. https://www6.inrae.fr/gdr-sciences-du-bois/content/download/6456/63436/version/1/file/PHYSICS+OF+DRYING+Conference.pdf
- Link
Link
https://www6.inrae.fr/gdr-sciences-du-bois/content/download/6456/63436/version/1/file/PHYSICS+OF+DRYING+Conference.pdf
Heck, K., & Weishaupt, K. (2018). Coupling free and porous medium flow.
Weishaupt, K., Koch, T., Gläser, D., Helmig, R., Hassanizadeh, S. M., & Weigand, B. (2017). Coupling free ﬂow and porous-media systems using a pore-network model.

Posters

2020
1. K. Weishaupt and R. Helmig, “Coupling of free flow and porous medium flow at the pore-network scale.” 2020.
  - BibTeX
  BibTeX
  @misc{sfbstatus2020-kw, author = {Weishaupt, Kilian and Helmig, Rainer}, note = {SFB1313 Status Seminar, Gültstein}, title = {Coupling of free flow and porous medium flow at the pore-network scale}, year = 2020 }
2019
1. K. Weishaupt, T. Koch, A. Seeland, S. Hermann, D. Böhringer, and B. Flemisch, “Sustainable infrastructure for the improved usability and archivability of research software on the example of Dumux.” Jun. 2019. [Online]. Available: https://de-rse.org/en/conf2019/
  - BibTeX
  - Link
  BibTeX
  @misc{derse2019-kw, author = {Weishaupt, Kilian and Koch, Timo and Seeland, Anett and Hermann, Sibylle and Böhringer, David and Flemisch, Bernd}, month = {06}, note = {deRSE19 - Conference for Research Software Engineers in Germany, Berlin}, title = {Sustainable infrastructure for the improved usability and archivability of research software on the example of Dumux}, url = {https://de-rse.org/en/conf2019/}, year = 2019 }
  Link
  https://de-rse.org/en/conf2019/
2. K. Weishaupt, T. Koch, V. Joekar-Niasar, S. M. Hassanizadeh, and R. Helmig, “A pore-scale approach to couple mass, momentum and energy at the interface between free flow and porous-medium flow.” May 2019. [Online]. Available: https://events.interpore.org/event/12/
  - BibTeX
  - Link
  BibTeX
  @misc{interpore2019-kw, author = {Weishaupt, Kilian and Koch, Timo and Joekar-Niasar, Vahid and Hassanizadeh, Seyed Majid and Helmig, Rainer}, month = {05}, note = {InterPore 11th International Conference on Porous Media, Valencia}, title = {A pore-scale approach to couple mass, momentum and energy at the interface between free flow and porous-medium flow}, url = {https://events.interpore.org/event/12/}, year = 2019 }
  Link
  https://events.interpore.org/event/12/
2018
1. K. Weishaupt et al., “Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow.” Mar. 2018. [Online]. Available: https://conference.simtech.uni-stuttgart.de/event/1/
  - BibTeX
  - Link
  BibTeX
  @misc{simtech2018-kw, author = {Weishaupt, Kilian and Helmig, Rainer and Zarikos, Ioannis and Hassanizadeh, Seyed Majid and Terzis, Alexandros and Yang, Guang and Weigand, Berndhard}, month = {03}, note = {2nd International Conference on Simulation Technology, Stuttgart}, title = {{Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow}}, url = {https://conference.simtech.uni-stuttgart.de/event/1/}, year = 2018 }
  Link
  https://conference.simtech.uni-stuttgart.de/event/1/
2. M. Lipp, R. Helmig, K. Weishaupt, and M. Schneider, “Adaptive Staggered 2D Grids for DuMuX - Plans/Ideas,” 2nd International Conference on Simulation Technology (SimTech 2018), 26.03.2018 - 28.03.2018, Stuttgart. in 2nd International Conference on Simulation Technology (SimTech 2018), 26.03.2018 - 28.03.2018, Stuttgart. Mar. 2018. [Online]. Available: https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf
  - BibTeX
  - Link
  BibTeX
  @misc{NULL, author = {Lipp, Melanie and Helmig, Rainer and Weishaupt, Kilian and Schneider, Martin}, booktitle = {2nd International Conference on Simulation Technology (SimTech 2018), 26.03.2018 - 28.03.2018, Stuttgart}, month = {03}, note = {, date=27.03.2018, IWS2ID=4541 }, title = {Adaptive Staggered 2D Grids for DuMuX - Plans/Ideas}, type = {Poster}, url = {https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf}, year = 2018 }
  Link
  https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf
2017
1. K. Weishaupt et al., “Pore-network modeling within the framework of DuMux and DUNE: A flexible, fully implicit approach with the possibility of coupling to other models.” May 2017. [Online]. Available: https://www.new.interpore.org/interpore-rotterdam-2017
  - BibTeX
  - Link
  BibTeX
  @misc{interpore2017b-kw, author = {Weishaupt, Kilian and Heck, Katharina and Koch, Timo and Gl\"{a}ser, Dennis and Terzis, Alexandros and Yang, Guang and Flemisch, Bernd and Helmig, Rainer}, month = {05}, note = {InterPore 9th International Conference on Porous Media, Rotterdam}, title = {Pore-network modeling within the framework of DuMux and DUNE: A flexible, fully implicit approach with the possibility of coupling to other models}, url = {https://www.new.interpore.org/interpore-rotterdam-2017}, year = 2017 }
  Link
  https://www.new.interpore.org/interpore-rotterdam-2017
2. K. Weishaupt, A. Terzis, I. Zarikos, G. Yang, R. Helmig, and S. M. Hassanizadeh, “Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow.” May 2017. [Online]. Available: https://www.new.interpore.org/interpore-rotterdam-2017
  - BibTeX
  - Link
  BibTeX
  @misc{interpore2017a-kw, author = {Weishaupt, Kilian and Terzis, Alexandros and Zarikos, Ioannis and Yang, Guang and Helmig, Rainer and Hassanizadeh, Seyed Majid}, month = {05}, note = {InterPore 9th International Conference on Porous Media, Rotterdam}, title = {Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow}, url = {https://www.new.interpore.org/interpore-rotterdam-2017}, year = 2017 }
  Link
  https://www.new.interpore.org/interpore-rotterdam-2017
3. K. Weishaupt et al., “Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow.” 2017.
  - BibTeX
  BibTeX
  @misc{badboll2017-kw, author = {Weishaupt, Kilian and Helmig, Rainer and Zarikos, Ioannis and Hassanizadeh, Seyed Majid and Terzis, Alexandros and Yang, Guang and Weigand, Berndhard}, note = {SimTech Status Seminar, Bad Boll}, title = {Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow}, year = 2017 }
4. M. Lipp, R. Helmig, K. Weishaupt, and M. Schneider, “Adaptive Staggered 2D Grids for DuMuX - Plans/Ideas,” 2nd SRP NUPUS Meeting, 09.10.2017 - 11.10.2017, Mühlhausen im Täle. in 2nd SRP NUPUS Meeting, 09.10.2017 - 11.10.2017, Mühlhausen im Täle. Oct. 2017. [Online]. Available: https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf
  - BibTeX
  - Link
  BibTeX
  @misc{NULL, author = {Lipp, Melanie and Helmig, Rainer and Weishaupt, Kilian and Schneider, Martin}, booktitle = {2nd SRP NUPUS Meeting, 09.10.2017 - 11.10.2017, Mühlhausen im Täle}, month = {10}, note = {, date=09.10.2017, IWS2ID=4540 }, title = {Adaptive Staggered 2D Grids for DuMuX - Plans/Ideas}, type = {Poster}, url = {https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf}, year = 2017 }
  Link
  https://www.iws.uni-stuttgart.de/publikationen/hydrosys/paper/2017/Plakat_NUPUS2017_MelanieLipp.pdf
2016
1. K. Weishaupt et al., “Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow.” 2016.
  - BibTeX
  BibTeX
  @misc{badboll2016-kw, author = {Weishaupt, Kilian and Heck, Katharina and Koch, Timo and Gl\"{a}ser, Dennis and Hassanizadeh, Seyed Majid and Weigand, Bernhard and Helmig, Rainer}, note = {SimTech Status Seminar, Bad Boll}, title = {Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow}, year = 2016 }
2. K. Weishaupt, T. Koch, and R. Helmig, “Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow.” May 2016. [Online]. Available: https://www.interpore.org/events/interpore2016-8th-international-conference-on-porous-media-annual-meeting/
  - BibTeX
  - Link
  BibTeX
  @misc{interpore2016-kw, author = {Weishaupt, Kilian and Koch, Timo and Helmig, Rainer}, month = {05}, note = {InterPore 8th International Conference on Porous Media, Cincinnati}, title = {Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow}, url = {https://www.interpore.org/events/interpore2016-8th-international-conference-on-porous-media-annual-meeting/}, year = 2016 }
  Link
  https://www.interpore.org/events/interpore2016-8th-international-conference-on-porous-media-annual-meeting/
3. K. Weishaupt, T. Koch, K. Heck, T. Fetzer, S. M. Hassanizadeh, and R. Helmig, “Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow / GRC.” Jul. 2016. [Online]. Available: https://www.grc.org/flow-and-transport-in-permeable-media-grs-conference/2016/
  - BibTeX
  - Link
  BibTeX
  @misc{gordon2016-kw, author = {Weishaupt, Kilian and Koch, Timo and Heck, Katharina and Fetzer, Thomas and Hassanizadeh, Seyed Majid and Helmig, Rainer}, month = {07}, note = {Gordon Research Conference on Flow and Transport in Permeable Media, Girona}, title = {Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow / GRC}, url = {https://www.grc.org/flow-and-transport-in-permeable-media-grs-conference/2016/}, year = 2016 }
  Link
  https://www.grc.org/flow-and-transport-in-permeable-media-grs-conference/2016/
2015
1. K. Weishaupt, T. Koch, R. Helmig, B. Weigand, S. M. Hassanizadeh, and D. Or, “Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow.” 2015.
  - BibTeX
  BibTeX
  @misc{badboll2015-kw, author = {Weishaupt, Kilian and Koch, Timo and Helmig, Rainer and Weigand, Berndhard and Hassanizadeh, Seyed Majid and Or, Dani}, note = {SimTech Status Seminar, Bad Boll}, title = {Coupling of Mass, Momentum and Energy at the Interface between Free Flow and Porous Media Flow}, year = 2015 }

Supervised student assignements

Analysis of the Stefan flow problem and comparison to an advection-diffusion formulation. (2022). (Masterarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
Coupled Free-Flow and Porous Media Flow Systems: Analysis of Turbulent Free-Flow Condtions and Pore-Network Models. (2022). (Forschungsmodul2).
Modeling calcite dissolution due to density-induced fingering of CO2-enriched water. (2021). (Master’s Thesis).
Investigation of linear solvers and preconditioners for sparse systems resulting from free-flow applications. (2021). (Masterarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
Numerische Simulation von Konvektion durch in Wasser gelöstes CO2. (2019). (Bachelorarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
Pore and pore-network scale modeling on realistic geometries extracted from CT images. (2019). (Masterarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
A dual pore-network model for fluid and energy transport in soils considering thermal non-equilibrium. (2019). (Masterarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
Comparative study of a fully-implicit and a sequential solution strategy for dynamic two-phase flow pore-network models. (2019). (mastersthesis).
Kopplung zwischen freier Strömung und Strömung im porösen Medium: Modellierung des Transportes von Metallen und Kolloiden in der hyporheischen Zone. (2018). (Bachelorarbeit). Universität Stuttgart, Institut für Wasser- und Umweltsystemmodellierung.
Modelling of salt precipitation and comparison with experimental results. (2018). (Masterthesis).
Modelling hydrodynamic dispersion under two-phase flow conditions. (2018). (Masterarbeit). Universität Stuttgart, Institut für Wasser-und Umweltsystemmodellierung, Lehrstuhl für Hydromechanik und Hydrosystemmodellierung.
Investigation of different coupling schemes for hybrid-dimensional models. (2018). (Masterthesis).
Dichtegetriebene Strömung durch Einlösen von CO2 in Wasser. (2018). (Bachelorarbeit). Universität Stuttgart, Institut für Wasser- und Umweltsystemmodellierung.
Parameterstudie zur Charakterisierung verschiedener Bodenarten für Poren-Netzwerk-Modelle. (2017). (Bachelorarbeit). Universität Stuttgart, Institut für Wasser- und Umweltsystemmodellierung.
Modellierung des Strömungsübergangs am porösen Medium für Filterelemente. (2016). (Masterthesis).

Research projects

SUSI: Sustainable infrastructure for the improved usability and archivability of research software on the example of the porous-media-simulator Dumux
Duration: 02/2019 - 09/2022
Department: LH2
Leader: Bernd Flemisch
Funding: DFG
SFB 1313, A02: Advanced modelling concepts for coupling free flow with porous-media flow
Duration: 01/2018 - 12/2025
Departments: LH2 and ITLR
Leaders: Rainer Helmig, Bernhard Weigand
Funding: DFG

Kilian Weishaupt

Contact

Office Hours

Teaching

Vita

Awards and Recognitions

Miscellaneous

Publications

(Journal-) Articles

Abstract

BibTeX

Link

Abstract

BibTeX

Link

Abstract

BibTeX

Link

Abstract

BibTeX

Link

Abstract

BibTeX

Link

BibTeX

Abstract

BibTeX

Link

Abstract

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

BibTeX

BibTeX

BibTeX

Link

BibTeX

Link

Theses

BibTeX

PhDs

BibTeX

Link

Talks

Link

Link

Link

Posters

2020

BibTeX

2019

BibTeX

Link

BibTeX

Link

2018

BibTeX

Link

BibTeX

Link

2017

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

2016

BibTeX

BibTeX

Link

BibTeX